Difference between revisions of "GM LS engine"

From Chevy Wiki
Jump to navigation Jump to search
m (Robot: Automated text replacement (-{{(commons|unreferenced|refimprove|mergefrom|unreferenced|expand|review|fansite|for|wikify|verylong|cleanup|images needed)[^}]*}} +))
m (Robot: Automated text replacement (-{{(fact|sia|update|citations\smissing|linkfarm|wiktionarypar|wikiquote|wiktionary|sisterlinks|rewrite|timefact|pov\||primarysources|orphan|contradict|future\sautomobile|otheruse|commons|portal|unreferenced|refimpr)
 
Line 23: Line 23:
The '''LS1''' shares little other than similar displacement, external dimensions, and rod bearings, with its [[Chevrolet Small-Block engine| predecessor]]. It is an all-aluminum 5.7 L ({{convert|5665|cc|CID|disp=s|abbr=on}}) [[pushrod]] engine and was rated between 305 - 350 hp (227 to 261 kW) and 335-375 ft·lbf (454-508 N·m) of [[torque]] in North America, depending on the application.  In Australia, continuous modifications were made to the LS1 engine throughout its lifetime, reaching 382 hp (285 kW) in the [[Holden Special Vehicles|HSV's]] YII series and a [[Callaway Cars Incorporated|Callaway]] modified version, named C4B, was fitted to HSV GTS models producing 402 hp (300 kW).  
The '''LS1''' shares little other than similar displacement, external dimensions, and rod bearings, with its [[Chevrolet Small-Block engine| predecessor]]. It is an all-aluminum 5.7 L ({{convert|5665|cc|CID|disp=s|abbr=on}}) [[pushrod]] engine and was rated between 305 - 350 hp (227 to 261 kW) and 335-375 ft·lbf (454-508 N·m) of [[torque]] in North America, depending on the application.  In Australia, continuous modifications were made to the LS1 engine throughout its lifetime, reaching 382 hp (285 kW) in the [[Holden Special Vehicles|HSV's]] YII series and a [[Callaway Cars Incorporated|Callaway]] modified version, named C4B, was fitted to HSV GTS models producing 402 hp (300 kW).  


The version fitted to the 2004 Pontiac GTO was rated at 350 hp (261 kW) and 365 ft·lbf (494 Nm) of torque. Beginning in 2001, the LS1 in the Corvette received the higher-flowing intake from the LS6 and a milder [[camshaft]] to keep power at the same level; this also allowed GM to remove the [[exhaust gas recirculation]] (EGR) system (Camaro/Firebird only; 97-00 Corvette LS1 never used an EGR system). The block is very similar to that of the higher-output LS6; beginning in 2002, some LS1 engines were actually built using the LS6 block instead. {{Fact|date=August 2008}} The LS1 was on the [[Ward's 10 Best Engines]] list for 1998.   
The version fitted to the 2004 Pontiac GTO was rated at 350 hp (261 kW) and 365 ft·lbf (494 Nm) of torque. Beginning in 2001, the LS1 in the Corvette received the higher-flowing intake from the LS6 and a milder [[camshaft]] to keep power at the same level; this also allowed GM to remove the [[exhaust gas recirculation]] (EGR) system (Camaro/Firebird only; 97-00 Corvette LS1 never used an EGR system). The block is very similar to that of the higher-output LS6; beginning in 2002, some LS1 engines were actually built using the LS6 block instead. The LS1 was on the [[Ward's 10 Best Engines]] list for 1998.   
* 1997-2004 [[Chevrolet Corvette C5]], excluding Z06
* 1997-2004 [[Chevrolet Corvette C5]], excluding Z06
* 1998-2002 [[Chevrolet Camaro]] Z28, SS
* 1998-2002 [[Chevrolet Camaro]] Z28, SS
Line 149: Line 149:
The '''LS7''' is a 7.0 L ({{convert|7011|cc|CID|disp=s|abbr=on}}) engine, based on the Gen IV architecture. The block is changed, with sleeved pistons and a larger 4.125 in (104.9 mm) bore and longer 4.00 in (101.6 mm) stroke than the LS2. The small-block's 4.4 in (111.8 mm) bore spacing is retained, requiring pressed-in cylinder liners. The crankshaft and main bearing caps are [[forged]] steel for durability, the connecting rods are forged titanium, and the pistons are [[Hypereutectic piston|hypereutectic]].  The two-valve arrangement is retained, though the titanium intake valves by [[Del West]] have grown to 2.20 in (55.9 mm) and sodium-filled exhaust valves are up to 1.61 in (40.9 mm).  
The '''LS7''' is a 7.0 L ({{convert|7011|cc|CID|disp=s|abbr=on}}) engine, based on the Gen IV architecture. The block is changed, with sleeved pistons and a larger 4.125 in (104.9 mm) bore and longer 4.00 in (101.6 mm) stroke than the LS2. The small-block's 4.4 in (111.8 mm) bore spacing is retained, requiring pressed-in cylinder liners. The crankshaft and main bearing caps are [[forged]] steel for durability, the connecting rods are forged titanium, and the pistons are [[Hypereutectic piston|hypereutectic]].  The two-valve arrangement is retained, though the titanium intake valves by [[Del West]] have grown to 2.20 in (55.9 mm) and sodium-filled exhaust valves are up to 1.61 in (40.9 mm).  


Peak output is 505 hp (377 kW) at 6300 rpm and 470 ft·lbf (637 N·m) at 4800 rpm with a 7000 rpm [[redline]] setting a new record for a production overhead valve pushrod engine.{{Fact|date=December 2007}} During GM's reliability testing of this engine in its prototype phase, the LS7 was remarked to have been repeatedly tested to be 8000 rpm capable, although power was not made at that rpm level, due to the constraints of the camshaft's profile and the intake manifold ability to flow required air at that engine speed.
Peak output is 505 hp (377 kW) at 6300 rpm and 470 ft·lbf (637 N·m) at 4800 rpm with a 7000 rpm [[redline]] setting a new record for a production overhead valve pushrod engine.  During GM's reliability testing of this engine in its prototype phase, the LS7 was remarked to have been repeatedly tested to be 8000 rpm capable, although power was not made at that rpm level, due to the constraints of the camshaft's profile and the intake manifold ability to flow required air at that engine speed.


The LS7 is hand-built by the [[General Motors Performance Build Center]] in [[Wixom, Michigan]]. Most of these engines are installed in the Z06, but some are also sold to individuals by GM as a [[crate engine]].  
The LS7 is hand-built by the [[General Motors Performance Build Center]] in [[Wixom, Michigan]]. Most of these engines are installed in the Z06, but some are also sold to individuals by GM as a [[crate engine]].  

Latest revision as of 23:02, 9 February 2009

GM LS engine
ManufacturerGeneral Motors
Also calledGM Vortec engine
Production1997–present
PredecessorGM LT engine, Chevrolet Small-Block engine, Chevrolet Big-Block engine

The LS series is a new design intended as the only V-8 engine utilized in General Motors' line of RWD cars and trucks. The LS series was a clean sheet design with little in common with the classic Chevrolet small block V8. The LS is all-aluminum and has 6-bolt main bearing caps.

The LS engine has been the sole powerplant of the Chevrolet Corvette since 1997 and has seen use in a wide variety of other General Motors vehicles, ranging from sport coupes to full size trucks. Due to the engine's relatively compact external dimensions compared to its displacement and power output, the engine family is also a popular choice for kit cars, hot rods and even light aircraft.

Generation III

The Generation III V-8 engines replaced the LT family in 1997. These shared the same bore spacing (4.4") as their cast iron predecessors but almost everything else was changed. The bore was reduced to 3.9 in and the stroke longer at 3.62 in. The engine blocks were cast in aluminum for car applications, and iron for most truck applications (notable exceptions include the Chevrolet TrailBlazer). The engine also introduced coil-on-plug ignition. The traditional five-bolt pentagonal cylinder head pattern was replaced with a square four-bolt design, and the pistons are of the flat-topped variety. The cylinder firing order was changed to 1-8-7-2-6-5-4-3, so that the LS series now corresponds to the firing pattern of other modern V8 engines (for example the Ford Modular V8).

LS1

GM LS1 engine from the Chevrolet Camaro

The LS1 shares little other than similar displacement, external dimensions, and rod bearings, with its predecessor. It is an all-aluminum 5.7 L (5,665 cc/345.7 cu in) pushrod engine and was rated between 305 - 350 hp (227 to 261 kW) and 335-375 ft·lbf (454-508 N·m) of torque in North America, depending on the application. In Australia, continuous modifications were made to the LS1 engine throughout its lifetime, reaching 382 hp (285 kW) in the HSV's YII series and a Callaway modified version, named C4B, was fitted to HSV GTS models producing 402 hp (300 kW).

The version fitted to the 2004 Pontiac GTO was rated at 350 hp (261 kW) and 365 ft·lbf (494 Nm) of torque. Beginning in 2001, the LS1 in the Corvette received the higher-flowing intake from the LS6 and a milder camshaft to keep power at the same level; this also allowed GM to remove the exhaust gas recirculation (EGR) system (Camaro/Firebird only; 97-00 Corvette LS1 never used an EGR system). The block is very similar to that of the higher-output LS6; beginning in 2002, some LS1 engines were actually built using the LS6 block instead. The LS1 was on the Ward's 10 Best Engines list for 1998.

  • 1997-2004 Chevrolet Corvette C5, excluding Z06
  • 1998-2002 Chevrolet Camaro Z28, SS
  • 1998-2002 Pontiac Firebird Formula, Trans Am, Trans Am WS6
  • 2004 Pontiac GTO
  • 1999-2005 Holden Commodore Ute
  • 1999-2005 Holden Commodore (VT, VX, VY, VZ)
  • 1999-2005 Holden Statesman (WH, WK, WL)
  • 1999-2005 Holden Caprice (WH, WK, WL)
  • 1999-2004 Holden Special Vehicles (all V8 models)
  • 2001-2005 Holden Monaro CV8
  • 2006-2007 Elfin MS8 Streamliner

LS6

GM LS6 engine in a Chevrolet Corvette Z06
LS6 can also refer to a 454 CID Chevrolet Big-Block engine of the 1970s

The LS6 is a higher-output version of GM's LS1 engine and retains the same capacity. The initial 2001 LS6 produced 385 hp (287 kW) and 385 ft·lbf (522 N·m), but the engine was modified for 2002 through 2004 to produce 405 hp (302 kW) and 400 ft·lbf (542 N·m) of torque. The LS6 was originally only used in the high-performance C5 Corvette Z06 model, with the Cadillac CTS V-Series getting the 400 hp engine later. The V-Series used the LS6 for two years before being replaced by the LS2 in 2006. For 2006, the Z06 replaced the LS6 with the new 7.0L LS7.

The LS6 shares its basic block architecture with the GM LS1 engine, but other changes were made to the design such as windows cast into the block between cylinders, improved main web strength and bay to bay breathing, an intake manifold and MAF-sensor with higher flow, a camshaft with higher lift and more duration, a higher compression ratio and a revised oiling system better suited to high lateral acceleration. [1]

The casting number, located on the top rear edge of the block, is 12561168.

Applications:

Generation IV

In 2004, the Generation III was superseded by the Generation IV. This category of engines has provisions for high-displacement ranges up to 7.0 L and power output to 638 hp (476 kW). Building upon the Generation III design, Generation IV was designed with displacement on demand in mind, a technology that allows 4 cylinders in alternating fashion from side to side and front to back to be deactivated. It can also accommodate variable valve timing. A 3-valve per cylinder design was originally slated for the LS7, which would have been a first for a GM pushrod engine; but the idea was shelved owing to design complexities and when the same two-valve configuration as the other Generation III and IV engines proved to be sufficient to meet the goals for the LS7. It has been reported that the LS3 and an upcoming 6.0 L Vortec engine represent the final two designs to be considered in the Generation IV engine family, and that future designs — expected around 2009 — will be part of the Generation V engine family.[2]

LS2

GM LS2 engine in a 2005 Chevrolet Corvette

The LS2 was introduced as the Corvette's new base engine for the 2005 model year. It produces 400 hp (298 kW) at 6000 rpm and 400 ft·lbf (542 N·m) at 4400 rpm from a slightly larger displacement of 6.0 L (5,967 cc/364.1 cu in). It is similar to the high-performance LS6, but with an improved power peak and more torque throughout the rpm range. The LS2s in the E-series HSVs are modified in Australia to produce 412 hp (307 kW) and 412 ft·lbf (559 N·m). The LS2s in the Buick Rainier, Chevrolet Trailblazer SS, and the Saab 9-7X Aero are rated at 395 hp (295 kW) and 400 lb·ft (540 N·m) of torque.


Applications:

  • 2005-2007 Buick Rainier

L76

See also the Vortec 6000 L76

L76 was originally Holden's version of the 6.0 L (5,967 cc/364.1 cu in) Generation IV engine. While displacement on demand technology was disabled on Holdens, this feature is enabled on the 2008 Pontiac G8 and subsequently re fitted in the 2009 model Holdens with AFM enabled, but only on models fitted with the 6L80 Automatic Transmission. The engine also meets Euro III emissions requirements. Output is 348 hp (260 kW) at 5600 rpm and 376 ft·lbf (510 N·m) at 4400 rpm for the Holden variant, and 361 hp (269.8 kW) and 385 ft·lbf of torque (526.5 N·m) for the G8 GT.[3]

Applications:

  • 2006 Holden VZ Commodore
  • 2008 Pontiac G8
  • 2009 Holden VE Commodore
  • 2009 Holden WM Statesman / Holden WM Caprice
  • 2009 Holden VE UTE

L98

For the tuned-port Generation I engine of the same RPO, see Chevrolet L98

The L98 is a slightly modified version of the L76. Since Holden does not use displacement on demand, some redundant hardware was removed from the L76. Power increased to 362 hp (270 kW) at 5700 rpm and 391 ft·lbf (530 Nm) at 4400 rpm.

Applications:

  • 2006 (MY06) Holden VZ SS Thunder Ute
  • 2006-2007 Holden VE Commodore
  • 2006-2007 Holden WM Statesman / Holden WM Caprice
  • 2007-2008 Chevrolet Lumina SS
  • 2007-2008 Chevrolet Caprice SS

LS3

GM LS3 Engine in a 2008 Chevrolet Corvette
LS3 can also refer to a 402 CID Chevrolet Big-Block engine of the 1970s

The LS3 was introduced as the Corvette's new base engine for the 2008 model year. It produces 430 hp (320 kW) at 5900 rpm and 424 ft·lbf (575 N·m) at 4600 rpm without the optional Corvette exhaust and is SAE certified. The block is an updated version of the LS2 casting featuring a larger bore of 4.06 in (103 mm) creating a displacement of 6.2 L (6,162 cc/376.0 cu in). It also features higher flowing cylinder heads sourced from the L92, a more aggressive camshaft with 0.551" lift, a revised valvetrain with 6 mm (0.24 in) offset intake rocker arms, a high-flow intake manifold and 47 lb/hr fuel injectors from the LS7 engine.

The L76/L92/LS3 cylinder heads use 2.165 in (55.0 mm) intake valves, and 1.59 in (40 mm) exhaust valves. Improved manufacturing efficiency makes these heads cheaper than the outgoing LS6 heads, and severely undercuts aftermarket heads. The large valves, however, limit maximum rpm - 6000 in the L76 (with AFM), and 6600 in the LS3 (with hollow stem valves).

In addition to the above, a dual mode exhaust package with a bypass on acceleration is available. The dual-mode exhaust uses vacuum-actuated outlet valves, which control engine noise during low-load operation, but open for maximum performance during high-load operation. The system is similar to the C6 Z06, but uses a 2.5 in (64 mm) diameter exhaust compared to the Z06's 3 in (76 mm). Power is boosted to 436 hp (325 kW) and 428 ft·lbf (580 N·m) with this option.

From April 2008, Australian performance car manufacturer, HSV, adopted the LS3 as its standard V8 throughout the range, replacing the LS2. The LS3 received modifications for its application to HSV's models, producing 425 hp (317 kW). Power and torque was restricted to protect the drivetrain currently used in the E-Series sedans.

Applications:

  • April 2008-present Holden Special Vehicles (all V8 models)
  • 2008-present Chevrolet Corvette
  • 2009 Pontiac G8 GXP (source: Pontiac web site, "Upcoming Vehicles," 3-16-2008)
  • June 2008-present Vauxhall VXR8
  • 2010 Chevrolet Camaro
  • The show Top Gear used the LS3 to power a blender.[4]

L99

For the 4.3 L (260 cu in) Generation II engine of the same RPO, see GM LT Engine

The L99 is derived from the LS3 with reduced output but adds Active Fuel Management (displacement on demand), which allows it to run on only four cylinders during light load conditions.[5] Power is 400 hp (298 kW) and 395 ft·lbf (536 N·m) of torque.[6][7]

Applications:

LS4

5.3 L LS4 V8 in a 2006 Chevrolet Impala SS
LS4 can also refer to a 454 CID Chevrolet Big-Block engine of the 1970s

The LS4 is a smaller 5.3 L (5,328 cc/325.1 cu in) version of the Generation IV block. Though it has the same displacement as the Vortec 5300 LH6, it differs in that it has an aluminum block rather than an iron one and it uses the same cylinder head as the Generation III LS6 engine.

This engine is adapted for transverse front-wheel drive applications. According to GM, "The crankshaft is shortened 13 mm – 3 mm at the flywheel end and 10 mm at the accessory drive end – to reduce the length of the engine compared to the 6.0L. All accessories are driven by a single serpentine belt to save space. The water pump is mounted remotely with an elongated pump manifold that connects it to the coolant passages. Revised oil pan baffles, or windage trays, are incorporated into the LS4 to ensure that the oil sump stays loaded during high-g cornering." [8] Active Fuel Managemment is also used. Output of this version is 303 hp (226 kW)/300 hp on LaCrosse Super and 323 ft·lbf (438 N·m).

Applications:

LS7

7.0 L LS7 engine in a 2006 Chevrolet Corvette Z06
LS7 can also refer to a 454 CID Chevrolet Big-Block engine of the 1970s

The LS7 is a 7.0 L (7,011 cc/427.8 cu in) engine, based on the Gen IV architecture. The block is changed, with sleeved pistons and a larger 4.125 in (104.9 mm) bore and longer 4.00 in (101.6 mm) stroke than the LS2. The small-block's 4.4 in (111.8 mm) bore spacing is retained, requiring pressed-in cylinder liners. The crankshaft and main bearing caps are forged steel for durability, the connecting rods are forged titanium, and the pistons are hypereutectic. The two-valve arrangement is retained, though the titanium intake valves by Del West have grown to 2.20 in (55.9 mm) and sodium-filled exhaust valves are up to 1.61 in (40.9 mm).

Peak output is 505 hp (377 kW) at 6300 rpm and 470 ft·lbf (637 N·m) at 4800 rpm with a 7000 rpm redline setting a new record for a production overhead valve pushrod engine. During GM's reliability testing of this engine in its prototype phase, the LS7 was remarked to have been repeatedly tested to be 8000 rpm capable, although power was not made at that rpm level, due to the constraints of the camshaft's profile and the intake manifold ability to flow required air at that engine speed.

The LS7 is hand-built by the General Motors Performance Build Center in Wixom, Michigan. Most of these engines are installed in the Z06, but some are also sold to individuals by GM as a crate engine.

After an extensive engineering process over several years, Holden Special Vehicles fitted the LS7 to a special edition model, the W427. The HSV-tuned engine produces 375kW (503hp) and 640Nm, making it the most powerful car ever built in Australia. The W427 was unveiled at the Melbourne International Motor Show on the 29th February, 2008[9] and went on sale in August 2008.

Applications:

LS7.R

The LS7.R engine is a variation of the LS7 used in the highly successful C6.R American Le Mans Series racecar. It was crowned as Global Motorsport Engine of the Year by a jury of 50 race engine engineers on the Professional Motorsport World Expo 2006 in Cologne, Germany.

LSX

At the 2006 SEMA show, GM Performance Parts introduced the LSX engine, an all-new cast-iron racing block based on the LS7 engine. It was designed with help from drag racing legend Warren Johnson. It offers displacements ranging from 364 cubic inches to 511 cubic inches (4.25" Bore x 4.5" Stroke) and is capable of withstanding 2500 bhp. This block incorporates two extra rows of head-bolt holes per bank for increased clamping capacity. The six bolt steel main caps are the same ones used on the LS7 engine. The engine debuted at the auto show in a customized 1969 Camaro owned by Reggie Jackson. The LSX will be available starting the second quarter of 2007, set to be available in authorized dealerships and retailers on March 31, 2007.[10]

LS9

The LS9 is a 6.2 L (6,162 cc/376.0 cu in) supercharged engine, based on the LS3; the LS7 block was not used due to the higher cylinder pressures created by the supercharger requiring the thicker cylinder walls of the LS3. Cylinder dimensions are now 4.06 in (103.25 mm) bore with a 3.62 in (92 mm) stroke. It is equipped with an Eaton four-lobe Roots type supercharger. Power output is 638 hp (476 kW) at 6500 rpm and 604 lb·ft (819 N·m) of torque at 3800 rpm.

Applications:

LSA

The supercharged 6.2 L LSA is similar to the LS9 and scheduled to debut in the 2009 Cadillac CTS-V. The LSA has been SAE certified at 556 hp (415 kW) @ 6100rpm and 551 lb·ft (747 N·m) of torque @ 3800rpm. GM labels it "the most powerful ever offered in Cadillac’s nearly 106-year history". The LSA features a smaller 1.9 L capacity supercharger rather than the 2.3 L variant of the LS9. Other differences include a slightly lower 9.0:1 compression ratio, single unit heat exchanger and cast pistons.

Applications:

  • 2009 Cadillac CTS V-Series

Vortec engines

Versions of both the Generation III and Generation IV V8 have also been used in trucks and SUVs. These are usually branded as GM Vortec engines.

Problems

In the early production run of the LS-series engine, some engines encountered abnormal amounts of 'piston slap' - a problem caused by too much clearance between the cylinder bore and the piston. [11] 'Piston Slap' sometimes sounds more like a knock or the sound of a diesel engine running, it is also typically worse when the engine is cold and lessens as the engine reaches operating temperature. The noise of 'Piston Slap' often is louder when listening for it below the oil pan.

See also

References

  1. Corvette LS6 - Ruthless Pursuit of Power
  2. Sutton, Mike (2007-08-29). "GM Reveals Small-Block V-8 With Direct Injection". WardsAuto.com. http://subscribers.wardsauto.com/ar/gm_reveals_v-8/wall.html?return=http://subscribers.wardsauto.com/ar/gm_reveals_v-8/index.html. Retrieved on 2007-08-30. 
  3. "All-new G8 accelerates new era of rear-wheel-drive performance at Pontiac". Global Auto Index. 2007-02-07. http://www.globalautoindex.com/news.plt?no=1735. Retrieved on 2007-08-30. 
  4. "Top Gear Builds Corvette Engine-Powered Blender". http://jalopnik.com/5090926/top-gear-builds-corvette-engine+powered-blender. Retrieved on 2008-11-17. 
  5. 2010 Chevrolet Camaro Details and Hi-Res Photos
  6. "2010 Chevrolet Camaro First Look". 2008-07-18. http://www.edmunds.com/insideline/do/Features/articleId=129446. Retrieved on 2008-07-21. 
  7. "2010 Chevy Camaro - Official Details and Images". 2008-07-21. http://www.autoblog.com/2008/07/21/2010-chevy-camaro-official-details-and-images/. Retrieved on 2008-07-21. 
  8. LS4 Overview - GM Powertrain, http://media.gm.com/us/powertrain/en/product_services/2008/Whats%20New/Gen%20IV/Gen%20IV%20Car/08_LS4.doc 
  9. Revealed: our fastest, most expensive road car - National - smh.com.au
  10. Hellwig, Ed (2006-10). "2006 SEMA Show - Reggie Jackson Camaro". Edmunds Inside Line. http://www.edmunds.com/insideline/do/AutoshowArticles/articleId=117396. Retrieved on 2007-08-30. 
  11. "GM Piston Slap". http://www.pistonslap.com/index.html. Retrieved on 2007-08-30. 

External links