Difference between revisions of "GM Quad-4 engine"

From Chevy Wiki
Jump to navigation Jump to search
m (1 revision)
m (Robot: Automated text replacement (-{{(fact|sia|update|citations\smissing|linkfarm|wiktionarypar|wikiquote|wiktionary|sisterlinks|rewrite|timefact|pov\||primarysources|orphan|contradict|future\sautomobile|otheruse|commons|portal|unreferenced|refimpr)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
{{Unreferenced|date=January 2008}}




The '''Quad 4''' (called '''Twin Cam''' after 1995) was a [[DOHC]] and [[SOHC]] [[straight-4]] [[automobile]] engine produced by [[General Motors Corporation|General Motors]]' [[Oldsmobile]] division. It was a modern engine for the time, but was criticized for roughness as well as its longevity{{Fact|date=January 2008}}. [[Balance shaft]]s were added in 1995, also known as a transitional year from the Quad 4 to the renamed TWIN CAM variant,  in 1996 2.4L (LD9) the complete engine makeover was accomplished. The name is derived from the engine's four cylinders and four valve per cylinder layout. There was a [[SOHC|single overhead camshaft]] variant that was produced for a brief time. The Quad 4 used an iron block and an aluminum head.


The Quad 4 debuted in 1987 and was replaced after 2001 by the [[Ecotec]]. Quad 4 engines were produced at GM's Delta Engine Plant (Plant 5) in [[Delta Township, Michigan]]. In recent years, it has gained a minor following in hot rodding circles as a period style engine (which looks like a 1930's [[Offenhauser]] twin cam unit){{Fact|date=January 2008}}.  
The '''Quad 4''' (called '''Twin Cam''' after 1995) was a [[DOHC]] and [[SOHC]] [[straight-4]] [[automobile]] engine produced by [[General Motors Corporation|General Motors]]' [[Oldsmobile]] division. It was a modern engine for the time, but was criticized for roughness as well as its longevity. [[Balance shaft]]s were added in 1995, also known as a transitional year from the Quad 4 to the renamed TWIN CAM variant,  in 1996 2.4L (LD9) the complete engine makeover was accomplished. The name is derived from the engine's four cylinders and four valve per cylinder layout. There was a [[SOHC|single overhead camshaft]] variant that was produced for a brief time. The Quad 4 used an iron block and an aluminum head.
 
The Quad 4 debuted in 1987 and was replaced after 2001 by the [[Ecotec]]. Quad 4 engines were produced at GM's Delta Engine Plant (Plant 5) in [[Delta Township, Michigan]]. In recent years, it has gained a minor following in hot rodding circles as a period style engine (which looks like a 1930's [[Offenhauser]] twin cam unit).  


==Quad OHC==
==Quad OHC==

Latest revision as of 23:02, 9 February 2009


The Quad 4 (called Twin Cam after 1995) was a DOHC and SOHC straight-4 automobile engine produced by General Motors' Oldsmobile division. It was a modern engine for the time, but was criticized for roughness as well as its longevity. Balance shafts were added in 1995, also known as a transitional year from the Quad 4 to the renamed TWIN CAM variant, in 1996 2.4L (LD9) the complete engine makeover was accomplished. The name is derived from the engine's four cylinders and four valve per cylinder layout. There was a single overhead camshaft variant that was produced for a brief time. The Quad 4 used an iron block and an aluminum head.

The Quad 4 debuted in 1987 and was replaced after 2001 by the Ecotec. Quad 4 engines were produced at GM's Delta Engine Plant (Plant 5) in Delta Township, Michigan. In recent years, it has gained a minor following in hot rodding circles as a period style engine (which looks like a 1930's Offenhauser twin cam unit).

Quad OHC

A SOHC variant of the Quad 4 was intended to replace the Tech IV. Debuting in 1992, this Quad OHC was an 8-valve engine and produced 120 hp (89 kW), 40 hp (30 kW) less than a Quad 4 from the same era. Torque was 140 ft·lbf (190 N·m).

Although power and economy were better than the pushrod Tech IV, the Quad OHC was retired after 1994 when the DOHC version became standard.

LD2

The LD2 was the standard version of the Quad 4. The LD2 was the first incarnation of the Quad 4. It is a lower output version of the Quad 4 when compared to the LGO or High Output Quad 4. There was a transitional version of the LD2 in 1995.

1995

For 1995, a balance shaft-equipped version of the 2.3 L version was produced. A clever arrangement ensured a constant load on the shafts: The crank drove one shaft, which drives the second, which drives the oil pump. The shafts spun at twice the engine rpm, forcing the redline to be reduced from 6800 to 6500 rpm. Output was 150 hp (110 kW) and 150 ft·lbf (200 N·m). This was the only Quad 4 family engine produced in 1995. This was known as a transitional year for the engine family.

Applications:

  • 1995 Pontiac Sunfire GT
  • 1995 Chevrolet Cavalier Z24
  • 1995 Pontiac Grand Am SE
  • 1995 Oldsmobile Achieva

LG0

The High-Output 2.3 L LG0 version produced 180 hp (134 kW) from 1989 to 1992, and 175 hp (130 kW) in 1993 and 1994. Changes included more aggressive camshafts, and an extra half point of compression (from 9.5:1 to 10.0:1).

Applications:

  • 1990-1993 Chevrolet Beretta GTZ
  • 1994 Chevrolet Beretta Z26
  • 1989-1991 Pontiac Grand Am "SE"
  • 1990-1991 Pontiac Grand Am "LE"; only w/"Sport Performance Package"
  • 1992-1994 Pontiac Grand Am "GT"
  • 1990-1991 Pontiac Grand Prix
  • 1989-1991 Oldsmobile Cutlass Calais "I-Series"
  • 1990-1991 Oldsmobile 442 (full model name: "Cutlass Calais Quad 442")
  • 1990-1991 Oldsmobile Cutlass Supreme
  • 1992-1994 Oldsmobile Achieva SC

W41

The W41 version was the highest-output Quad 4 at 190 hp (142 kW) in 1991 and 1992, and 185 hp (138 kW) in 1993. The additional 10 hp (7.5 kW) came from longer duration cams and a different PROM.

Applications:

  • 1991 Oldsmobile 442
  • 1992-1993 Oldsmobile Achieva SCX

LD9

The LD9 Twin Cam was a 2.4 L (146 cu in) Quad 4 variant with balance shafts, debuting in 1996. Bore was decreased from 92 mm (3.6 in) to 90 mm (3.5 in) and stroke increased from 85 mm (3.3 in) to 94 mm (3.70 in) for better torque, and power was increased to 150 hp (112 kW).[1] This engine received a minor update halfway through the 1999 model year that eliminated the EGR, increased the compression ratio from 9.5:1 to 9.7:1, and switched from low impedance fuel injectors to high impedance.

  • note the LD9 has been know to have connecting rod and connecting rod bearing problems(they tend to throw rods) when they get over 100,000 miles on them. First you will start to knock with out warning, if you do experience this problem you have time to save your engine(rebuilding it or rebuild shop) Some say to use 5w-40, 10w-40 oil, or 20w-50 racing oil to help prevent this or buy aftermarket connecting rods and bearings(which are a lot stronger)

Applications:

  • 1996-2002 Chevrolet Cavalier Z24 & LS
  • 1996-2002 Toyota cavalier 2.4Z
  • 1996-2001 Pontiac Sunfire GT & SE
  • 1996-2001 Pontiac Grand Am
  • 1996-1998 Oldsmobile Achieva
  • 1999-2001 Oldsmobile Alero
  • 1997-1999 Chevrolet Malibu
  • 1997-1999 Buick Skylark

External links

See also